Basement flooring installation in Burlington, NC
The floor is the first thing that fails in a damp basement. Choosing a material that tolerates moisture is the most important decision you will make down there.

Why basement floors are different
A basement floor sits on concrete, which is never perfectly dry. Even a basement that never floods will release moisture vapor through the slab, especially in a humid Piedmont summer. Solid hardwood, glue-down laminate and carpet with a standard pad tend to suffer in that environment. Cupping, mold, delamination and lingering odors are all common results.
The right basement floor is one that either resists moisture or lets it pass without damage. It should also be comfortable to walk on, because concrete is cold and hard, and it should be easy to repair or replace if the basement ever does get wet.
Floor options that work
- Luxury vinyl plank: waterproof, available in wood and stone looks, comfortable and relatively affordable. See LVP flooring installation.
- Porcelain or ceramic tile: very durable and unaffected by moisture, though it feels cold and needs a flat substrate.
- Raised subfloor panels: dimpled plastic with plywood on top, creating an air gap that helps with comfort and drainage.
- Engineered wood designed for below-grade use: only with proper moisture testing and underlayment.
- Sealed or stained concrete: simple, low-cost and modern, with rugs for comfort.
Testing before installing
We do not guess about moisture. Before we recommend a floor, we check the slab for moisture vapor using accepted methods and look at the area for stains, efflorescence or signs of past flooding. If the readings are high, installing a finished floor without addressing the source would be asking for trouble. We tell you what to fix first, whether that is a drain extension, grading or a sealer.
Steps for a basement floor installation
- Clear the room and remove old carpet, tile or adhesives.
- Grind or patch the slab to remove high spots and fill cracks.
- Test moisture and apply the primer or barrier recommended for the chosen floor.
- Install any subfloor or underlayment designed for below-grade use.
- Lay the floor, leaving the expansion gap at walls that the manufacturer requires.
- Install transitions, baseboards and shoe molding.
- Return furniture and review care instructions with you.
Comfort underfoot
Concrete is cold in winter. If you plan to spend a lot of time down there, consider a floor with some built-in cushion, such as vinyl with an attached pad, or a raised subfloor that adds a thermal break. Radiant heat mats under tile are an option for bathrooms and small areas. Area rugs, of course, add comfort without committing the whole floor.
Prepping a damp or cracked slab
Cracks in a slab are common, and most are cosmetic. Hairline cracks can be filled with an elastic sealant. Wider cracks or ones that leak water need attention before flooring. If the slab has been painted or sealed in the past, those coatings may prevent adhesive from bonding. We grind or test the surface to see what is there.
If the slab is rough, an overlay or self-leveling compound can create a smooth surface. These products need the slab to be clean and primed. In basements where moisture is above the level a floor can tolerate, a surface sealer or a raised subfloor may be needed.
A comfortable basement floor
If you plan to use the basement in winter, a thermal break under the floor makes a real difference. Insulated panel systems, foam underlayments and carpet tiles on a vapor-permeable base all help. Choose based on how you will use the room.
Questions we hear on the phone
Short answers to what callers ask most. Call if yours is not here.
Can I put hardwood in a basement?
Solid hardwood is not recommended below grade. Some engineered products can work with proper testing, but vinyl plank and tile are safer choices.
Is vinyl plank really waterproof?
The planks themselves resist water. A flood can still seep under them, so drainage and subfloor matter.
How long does installation take?
Small basements can be done in a few days. Slab prep adds time when there are cracks or uneven areas.
Do I need to remove my old floor?
Usually yes. Installing over carpet or damp material traps moisture.
Related services
Tell us about your project.
Call and we will schedule your estimate.