Tile flooring installation in Burlington, NC

Tile can last for generations when it is installed on a flat, stable surface with the right setting materials. The preparation matters more than the tile itself.

Sunlit living room with wood plank flooring and a stone fireplace
Call (336) 654-1130Serving Burlington and nearby Alamance County townsEstimates scheduled by phone

Why tile is still a favorite

Tile is one of the oldest and most durable floor coverings. It does not burn, it does not stain easily and it is not hurt by water. That makes it a good choice for bathrooms, kitchens, mudrooms, laundry rooms and entries. Today's porcelain can mimic wood, stone or concrete, so you can have a modern look with old-fashioned durability.

The trade-offs are real. Tile is hard and cold, so it can be tiring to stand on for long. Dropped dishes break. Grout needs cleaning and sometimes sealing. And the floor beneath must be extremely flat and stiff, or the tile will crack.

Types of floor tile

  • Porcelain: dense, low in water absorption, very durable, widely used for floors.
  • Ceramic: lighter and easier to cut, best for lower-traffic areas and walls.
  • Natural stone: marble, slate, travertine and limestone, beautiful but often needing sealing and gentle care.
  • Large-format tile: fewer grout lines, a modern look, but needs a flatter surface.
  • Mosaic and patterned tile: good for accents, bathroom floors and entries.

Preparing the surface

Most tile failures are not tile problems. They are surface problems. A subfloor that flexes will crack tile and grout. A slab with a hump will leave tiles rocking. A damp substrate may let adhesive fail. We check each of these before choosing a method.

Over wood subfloors we often add a cement board or decoupling membrane. Over slabs we grind high spots and patch low ones. In bathrooms, we make sure the floor has the right slope and waterproofing. Our bathroom tile installation page covers walls and showers as well.

Installation steps

  1. Remove old flooring and clean the surface to bare substrate.
  2. Check flatness and repair any movement or damage.
  3. Install underlayment, membrane or cement board as needed.
  4. Plan the layout from the center, so cuts are balanced and the pattern looks even.
  5. Spread thin-set with the right trowel and set each tile with proper spacing.
  6. Let the thin-set cure, then grout and clean the joints.
  7. Seal grout and natural stone where appropriate, and install transitions and baseboards.

Grout and maintenance

Grout color changes the whole look. A matching grout makes the floor look uniform. A contrasting grout emphasizes the pattern. Epoxy grout resists stains better but is harder to work with. Cementitious grout is common and needs sealing in wet areas. A soft brush and a neutral cleaner are enough for regular care. Harsh acids can damage grout and natural stone.

Tile in different rooms

In kitchens, choose a slightly textured surface and consider padded mats where you stand to cook. In bathrooms, small tiles or textured surfaces grip better when wet. In entries, durable porcelain handles dirt and moisture. In basements, tile is an excellent choice when the slab is dry and flat, see basement flooring installation. For broader choices, see our flooring installation page.

Heated floors and tile

Tile feels cold in winter, and many homeowners add electric radiant heat mats under bathroom and kitchen floors. These are thin, installed under the thin-set and controlled by a thermostat. They add comfort for a small operating cost and are one of the most appreciated upgrades. They work best when planned before the floor goes in, since the layout depends on the mat dimensions.

Heated floors need their own circuit and an electrician where wiring is required. We coordinate with the appropriate trade so everything is inspected and tested before tile covers it.

Tile sizes and patterns

Large tile makes small rooms feel less chopped up but requires a flatter floor. Staggered patterns, such as a one-third offset, reduce lippage on long rectangular tiles. Herringbone and basket-weave add detail and work best in smaller areas, since they take more time to lay.

Questions we hear on the phone

Short answers to what callers ask most. Call if yours is not here.

Can tile go over existing tile?

Sometimes, if the old tile is sound and flat. Height and weight matter, so we check first.

Why did my tile crack?

Often movement in the subfloor or a hollow spot under the tile. We find the cause before repairing.

Is natural stone hard to maintain?

It needs more care than porcelain. We explain the requirements.

How long does a tile floor take?

A small room takes a few days including curing and grout. Larger areas take longer.

Tell us about your project.

Call and we will schedule your estimate.

Call (336) 654-1130
Call (336) 654-1130