Door installation in Burlington, NC
A door has to open, close, lock and keep out weather. When any of those goes wrong, it shows quickly.
Doors that need attention
A front door that sticks in summer and leaks air in winter is a common call. So is a patio slider that sticks on its track, a back door with rotted threshold or an interior door that never latches. Some of these are quick fixes. Others signal a door that is past repair or a frame that has moved.
Doors are important because they are used every day, they affect security and they are one of the first things visitors see. A new entry door can change the look of a house and improve weather sealing at the same time.
Types of doors
- Entry doors: steel, fiberglass or wood, with or without glass.
- Patio doors: sliding, hinged French doors or multi-panel designs.
- Storm and screen doors: for ventilation and extra protection.
- Interior doors: hollow-core, solid-core and paneled styles.
- Pocket and barn-style doors: for tight spaces.
- Garage service doors and side doors.
How installation goes
- Measure the opening and choose the door, including frame, swing and hardware.
- Remove the old door and inspect the frame and threshold for rot or damage.
- Repair framing and flashing, and install a sill pan or flashing to drain water away.
- Set the new door or prehung unit plumb and level, shimming carefully.
- Fasten through the frame, insulate gaps and caulk the exterior.
- Install lockset, deadbolt, weatherstripping and sweep.
- Adjust, test and finish with trim and paint.
Prehung or slab
A slab is only the door. A prehung unit includes the door, frame and hinges, and is generally better when the old frame is out of square or damaged. A slab can be installed if the existing frame is solid and the door is simply worn. For interior doors, installing a slab into a good frame is common.
Weather and security
Good weatherstripping and a correct threshold keep out drafts and water. For security, a solid door, a quality deadbolt with a strong strike plate and long screws into the framing are the basics. A frame that is rotted or split at the lock makes the door easy to kick in no matter how strong the door is. We reinforce the frame during installation.
Common causes of a door that will not close
A door that sticks in summer and works fine in winter usually swells with humidity. Sanding or planing the edges, then sealing all six sides, solves it. A door that rubs at the top corner on the latch side often means the hinges have loosened or the frame has shifted. Tightening hinge screws, or using longer screws into the framing, brings it back. A door that gaps at the top and rubs at the bottom may signal movement in the house, which is worth looking at.
Energy and comfort
Entry doors with foam cores insulate better than hollow ones. Glass panels let in light but lose heat, so look for double-pane inserts. A good threshold seals the bottom, and weatherstripping on the sides and top closes small gaps. On a windy day, hold a candle or a thin strip of paper near the edges. If it flutters, you have a draft.
Hardware and finish
Choose hardware you like to touch, since you use it every day. Match the finish to the house numbers, light fixtures and mailbox for a clean look. Paint exterior doors with a high-quality exterior paint on all sides, including the top and bottom edges, to keep moisture out.
Lockset and keys
If you have lost track of who has keys to your home, a new door or a new lock is a chance to start fresh. Keyed-alike sets let one key open several doors. Smart locks are an option, though a plain deadbolt is often the most reliable choice.
Questions we hear on the phone
Short answers to what callers ask most. Call if yours is not here.
Can I replace just the door?
Yes, if the frame is in good shape. We check it.
Why does my door stick?
Humidity, a settling house or loose hinges. We find the cause.
How long does it take to install an entry door?
Often a half day to a full day.
Can you install a door I buy myself?
Yes. We inspect it on delivery.
Related services
Tell us about your project.
Call and we will schedule your estimate.