Room additions in Burlington, NC
One extra room can ease crowding, give a family member privacy or create a quiet place to work. We help you design it around how the house is used now.
Choosing the room that helps most
Adding a room is different from adding a wing. You are usually solving one specific problem: a bedroom for a child who is getting older, a home office for someone who works remotely, a family room so the living room can be quiet, a playroom to keep toys out of sight. A single well-planned room can change daily life in a house more than a whole renovation of existing space.
We spend the most time on where the room goes and how it links with its neighbors. A bedroom that opens off a busy kitchen is noisy. An office next to the television room is distracting. A playroom is best near the kitchen so parents can keep an eye on it. We sketch options on the spot, using the actual walls of your house.
Where a new room can go
- Behind the house: usually the simplest, since there is room to grow and the roof tie-in is straightforward.
- To the side: possible when setbacks allow, and it can improve the street view.
- Over the garage: a good use of an existing footprint when the framing below can carry it.
- Within the existing roofline: finishing an attic gives new space without a new foundation, see attic conversion.
- In the garage: a conversion keeps the footprint but loses the parking, see garage conversion.
Practical details that matter
Every new room needs a few things that are easy to overlook. Heating and cooling must reach it, and the existing system may not be sized for the extra area. Electrical circuits should handle current needs and some future ones. Windows must provide light and ventilation, and a bedroom needs a window large enough to escape through in an emergency. Closets are a requirement for a bedroom in the eyes of many buyers and appraisers.
We also think about sound. If the new room shares a wall with a bedroom, a layer of insulation and thoughtful door placement can help a great deal.
Our process for a room addition
- Meet at your home to talk about the room and walk the site.
- Prepare a plan and discuss options for size, windows, doors and finishes.
- Confirm permit requirements and prepare drawings to the standard your local office needs.
- Build the foundation, frame the walls and roof and close it in against the weather.
- Rough in electrical and heating and cooling, then insulate and hang drywall.
- Install flooring, trim, paint and lighting.
- Open the connection to the rest of the house and finish the transition.
Keeping the house livable
The part of the process that surprises people is the opening between old and new. We delay that cut until the weatherproof shell is complete. That keeps dust, noise and drafts out of the house for most of the project. When the time comes, we protect the floors and doorways, cut the opening, and finish it quickly.
How we differ from larger additions
A single room is smaller than a full wing, so the foundation, framing and permits are simpler. If you want multiple rooms, or a suite with a bathroom, see our home additions page. If the new room is a bedroom with a private bathroom for a relative, our in-law suite additions page gives more detail.
Neighbors and property lines
Before building, confirm setbacks from property lines and any easements. Tell your neighbors about the project, since construction can mean noise and activity. A friendly heads-up goes a long way.
Questions we hear on the phone
Short answers to what callers ask most. Call if yours is not here.
Can you add a room on a slab house?
Yes. The new section gets its own footing and a floor that matches the old height.
What size room addition is typical?
Anywhere from a modest bump-out to a good-sized bedroom. We design to your needs and the lot.
Will I need to move out?
Almost never. We keep the work area sealed from the rest of the home.
Do I need a permit?
Yes, in nearly all cases. We help you understand the process.
Related services
Tell us about your project.
Call and we will schedule your estimate.