Bathroom vanity installation in Burlington, NC
A new vanity is the quickest way to refresh a bathroom, if it is chosen and installed with the room in mind.
Why vanities are not plug and play
A vanity looks like furniture, but it connects to water supply, a drain, the wall and often the floor. The location of those connections, the depth of the cabinet and the width of the top all have to line up. A vanity that is a few inches too deep can block a door or make a small room feel tight.
We measure before you order, check the plumbing and help you choose a size that fits. That avoids the classic problem of a beautiful vanity that will not go where you hoped.
Choosing a vanity
- Width: single sink, double sink or a compact size for small rooms.
- Depth: standard or slim, depending on the door and toilet clearance.
- Top material: quartz, solid surface, cultured marble or stone.
- Storage: drawers are easier to use than doors in most bathrooms.
- Style: floating, furniture-style or traditional.
- Faucet holes: match the faucet to the pre-drilled top.
What installation involves
- Remove the old vanity, top and faucet and shut off water.
- Check the wall and floor, repair damage and mark studs.
- Adjust or move supply and drain lines if needed.
- Set the cabinet, level it and fasten it to the wall.
- Install the top, sink, faucet and drain.
- Connect water, test for leaks and caulk.
- Hang the mirror and light fixtures and finish with trim.
Old plumbing surprises
Behind many old vanities are shutoff valves that no longer close, corroded supply lines and drain pipes that sit at the wrong height for a new cabinet. We replace these when they are not up to the job, because a leak under a vanity can quietly ruin a floor. We also look at the wall for water damage once the old cabinet comes out.
Lighting, mirrors and outlets
A vanity is only as good as the light above it. Lights on both sides of the mirror give the most even illumination for faces. Check that outlets are at a convenient height and, in bathrooms, protected as required. If you are updating lighting, we can combine the work and keep the walls clean.
A vanity in a bigger project
If the whole bathroom feels dated, a new vanity may be just one piece. See bathroom remodeling and small bathroom remodeling for the larger picture, or bathroom flooring installation if the floor needs help. Call (336) 654-1130 to discuss yours.
Details that make a vanity last
Moisture is the main enemy of a vanity. Look for solid wood or plywood boxes, sealed edges around the sink cutout and finishes that resist humidity. Particleboard exposed to water swells and fails. Caulking the back edge of the top and the joint to the wall keeps splashes from reaching the cabinet.
We also check the shutoff valves, supply lines and drain while the cabinet is out, replacing worn parts. A small leak under a vanity can go unnoticed for months, so a clean, dry cabinet floor after installation is a good sign. We test every connection before leaving.
Measuring before you shop
Measure the space available, including the distance to the door, toilet and any nearby walls. Check the location of the drain and supply lines and note the height of any window or light above. Take photos and bring the numbers when you shop.
Keep in mind that vanity depth and width are not the same as the top size, since tops often overhang the cabinet. We can check a specific model against your room before you buy, which avoids returns and delays.
Questions we hear on the phone
Short answers to what callers ask most. Call if yours is not here.
Can you install a vanity I buy myself?
Yes. Please share the model so we can check dimensions.
Can I move my vanity to another wall?
Often yes, though it requires plumbing work.
What top is easiest to maintain?
Quartz and solid surface are both durable and easy to clean.
Do you replace the faucet too?
Yes, and the supply lines and drain.
Related services
Tell us about your project.
Call and we will schedule your estimate.