Interior door installation in Burlington, NC
Interior doors are touched dozens of times a day. When they hang right, no one notices. When they do not, everyone does.
What makes a door hang right
A door that swings freely, latches softly and has an even gap all around is the result of a plumb and square frame. Houses settle and walls are rarely perfect, so installing a door means adjusting it to the opening. Shims, careful measurement and checking the swing are what make the difference.
We install new doors, replace old ones and fix sticking or rubbing doors. If the opening is crooked, we correct it instead of forcing the door.
Door styles
- Pre-hung doors: door and frame come together.
- Slab doors: just the door, fitted to an existing frame.
- Pocket doors: slide into the wall to save space.
- Barn-style doors: hang from a track on the wall.
- Bifold and sliding closet doors.
- French doors with glass panels.
Hollow-core or solid
Hollow-core doors are light and economical. Solid-core doors weigh more, block sound better and feel more substantial. In bedrooms, offices and bathrooms, solid-core doors give noticeably more privacy. Many people choose solid-core doors for key rooms and hollow-core for closets.
How installation works
- Measure the opening width, height and wall thickness.
- Remove the old door and trim if replacing.
- Set the new frame and shim it plumb and level.
- Fasten the frame through the shims.
- Hang the door and check the gap and swing.
- Install hinges, latch and strike.
- Add casing and touch up paint.
Pocket doors and special cases
Pocket doors need space inside the wall and may require moving plumbing or wiring. Barn doors need blocking in the wall to carry the track. Doors in older homes sometimes have odd sizes that need custom work. We check these before ordering.
Hardware, trim and finish
Hardware changes how a door feels. Lever handles are easier to use than knobs, especially for people with limited grip. Quality hinges and latches make doors quiet and smooth. Match finishes across a floor so the hardware looks consistent.
Trim ties the door into the room. Casing size and style should match the rest of the house. If you are replacing only some doors, we can match casing and paint so the new doors do not stand out. A well-finished door looks like it has always been there.
Fixing problems in an existing door
Sometimes you do not need a new door. A sticking door can be cured by tightening or shimming hinges, planing an edge or adjusting the strike plate. A door that will not latch may need the frame adjusted. Humidity makes wood swell and shrink with the seasons.
If the frame is badly out of square or the house has settled, replacing the door may not solve the problem. We look at the cause first, then decide whether to adjust, repair or replace.
Questions to ask before ordering
Ask whether the door is pre-hung, what the core is made of and how the door will be finished. Ask who supplies hardware and trim and how the opening will be corrected if it is out of square. A few questions up front prevent a door that does not fit or a finish that does not match the rest of the house.
Questions we hear on the phone
Short answers to what callers ask most. Call if yours is not here.
Can you fix a door that sticks?
Yes. Often we adjust hinges, plane an edge or correct the frame.
Pre-hung or slab?
Pre-hung is best when the frame is damaged. Slab works if the frame is good.
Do you paint the new doors?
We can prime and paint on request.
Can you widen a doorway?
Yes, with proper framing and a header if needed.
Related services
Tell us about your project.
Call and we will schedule your estimate.