Drywall installation in Burlington, NC
Good drywall is invisible. Bad drywall shows in every light. The difference is in the taping, sanding and finishing.
Where drywall goes
Drywall forms most interior walls and ceilings in modern homes. We install it in new additions, finished basements, remodeled rooms and anywhere walls have been opened for plumbing, electrical or structure. Installing the boards is only the first part. Finishing them smooth is where skill shows.
If you are repairing damage rather than hanging new boards, see drywall repair.
Types of drywall
- Standard half-inch for most walls.
- Five-eighths for ceilings and fire-rated assemblies.
- Moisture-resistant board for baths and laundry areas.
- Mold-resistant paperless board for basements.
- Cement board as a tile backer in showers.
- Soundproof board for noise control.
How installation proceeds
- Check framing, insulation and wiring before covering.
- Measure and cut sheets to minimize seams.
- Hang ceilings first, then walls.
- Fasten with screws at proper spacing.
- Apply tape and joint compound in several coats.
- Sand between coats and prime.
Finishing levels
Not all drywall finishes are equal. Walls that will be painted flat need less perfection than walls that will be glossy or washed with strong light. We discuss where the surface will see raking light, such as hallways with windows or tall ceilings, and finish those areas with extra care. Primer and good paint complete the job.
Dust and cleanup
Sanding drywall makes fine dust. We contain the work area, seal doorways and use vacuum sanders where possible. We recommend moving belongings out of the way and covering vents. Expect several days of work between coats, because compound needs to dry between steps.
Pair with other work
Drywall is part of nearly every remodel. See basement finishing, room additions, interior painting and trim and molding installation. Call (336) 654-1130 to schedule a visit.
Planning around framing and utilities
Before drywall goes up, we check that framing is straight, insulation is in place and wiring and plumbing have passed inspection. Missing any step means cutting into finished walls later. We also add blocking for cabinets, grab bars, shelves and TVs so those items can be mounted securely.
Ceilings and walls with a lot of light on them need extra care in finishing. We plan where seams fall and avoid them at corners and window edges where they show. These details do not add cost but depend on experience and planning.
Schedule and what to expect
A typical room takes several days from hanging to paint-ready, mostly because compound needs time to dry between coats. Humidity and temperature affect drying, so winter and humid summer days can take longer.
We tell you the sequence in advance so you can plan, and we keep the work area as clean as possible. You will see boards go up in a day, then wait while the finishing steps complete. The result is a smooth wall that disappears under paint.
Questions to ask a drywall contractor
Ask what level of finish is planned, how dust will be contained and how many coats of compound will be used. Ask who primes and paints and how the schedule handles drying time. These questions reveal whether the contractor focuses on a smooth, lasting finish or only on speed. The answers help you compare proposals fairly.
Protecting your home during the work
Drywall work is dusty, so we cover floors, close off doorways and cover vents in the work area. We recommend removing small items and covering furniture you cannot move. Dust from sanding settles on everything, which is why containment matters. At the end of each day, we sweep and vacuum so the space stays usable, and we leave the room ready for the next coat.
Questions we hear on the phone
Short answers to what callers ask most. Call if yours is not here.
How long does drywall take?
Hanging is quick. Finishing takes days because of drying between coats.
Can you match existing texture?
Often yes. Samples help.
Do I need special board in a basement?
Mold-resistant board is a smart choice.
Will you paint it too?
Yes. We can prime and paint after finishing.
Related services
Tell us about your project.
Call and we will schedule your estimate.