Granite countertop installation in Burlington, NC

Granite is natural stone, so no two slabs are the same. Choosing and installing it well makes a counter that lasts for decades.

Call (336) 654-1130Serving Burlington and nearby Alamance County townsEstimates scheduled by phone

Why people still choose granite

Granite has long been a kitchen favorite. It is hard, handles heat well and has a natural look that cannot be duplicated. Each slab has its own pattern, so your counter is unique. Many homeowners like that variety and the way stone feels in a working kitchen.

Granite is also available in many colors, from black and gray to warm browns and bold patterns. Honed or leathered finishes give a softer look than the classic polished surface.

Choosing a slab

  • Visit the stone yard and look at the actual slab you will receive.
  • Check movement, veining and any dark or light patches.
  • Decide how seams will fall with the pattern.
  • Pick an edge: eased, bullnose, ogee or beveled.
  • Match the color to cabinets, floors and backsplash.

Sealing and care

Granite is porous to some degree and benefits from sealing. A good sealer helps resist stains from oil, wine and coffee. How often it needs resealing depends on the stone. A simple test is to see whether a few drops of water darken the surface after a few minutes. If they do, it is time to seal. Everyday cleaning with mild soap is enough.

How installation works

  1. Choose the slab and confirm the layout with the fabricator.
  2. Install and level cabinets.
  3. Template the counters and sink cutouts.
  4. Fabricate and polish the pieces.
  5. Remove old counters and set the granite with support.
  6. Seal seams and edges, connect the sink and cooktop and apply sealer.

Weight and support

Granite is heavy. Cabinets must be strong, level and well fastened, and long spans or overhangs need brackets or corbels. Older cabinets sometimes need repair or reinforcement before a stone top goes on. We check this at the start so the counter does not crack later.

Compare with other surfaces

If you want a more uniform look with no sealing, read about quartz countertop installation. For an overview of choices, see kitchen countertop installation. If you are rebuilding the whole kitchen, start with kitchen remodeling. To discuss granite for your kitchen, call (336) 654-1130.

Natural variation and what to expect

Granite varies from slab to slab and across a single slab. Veining, mineral flecks and color shifts are part of its character. If you have a strong preference, choose from actual slabs rather than a small sample. A sample is only a hint of what the whole slab looks like.

Expect some fissures and pits, which are natural and normal in the stone. Fabricators fill and polish where needed. If a feature bothers you, mention it before the slab is cut, because it is easier to choose a different slab than to change a finished counter.

Cleaning and daily use

Wipe granite with mild soap and water. Avoid acidic cleaners such as vinegar, which can dull sealer. Blot spills of oil, wine and coffee quickly. Use cutting boards to protect knives and the surface, and trivets for very hot pots.

Reseal as the stone needs it. Over years, a well-cared-for granite counter stays handsome, and its natural pattern becomes part of the character of your kitchen.

Questions to ask at the stone yard

Ask to see the exact slab, how seams will be placed and what the edge will look like. Ask about sealing, how the stone was treated and what care is recommended. Ask when fabrication will be done and who will be on site at installation. Slab selection is the moment to ask, because later changes are costly.

Questions we hear on the phone

Short answers to what callers ask most. Call if yours is not here.

Does granite stain?

It can if left unsealed. Sealing and quick cleanup prevent most stains.

Can granite handle hot pans?

It tolerates heat well, though a trivet is still a good habit.

Will seams show?

They are visible up close but can be placed and matched to look neat.

Can I reuse my old granite?

Rarely. Fitting to a new layout usually needs new cuts.

Tell us about your project.

Call and we will schedule your estimate.

Call (336) 654-1130
Call (336) 654-1130