Kitchen backsplash installation in Burlington, NC
A backsplash protects the wall and finishes the kitchen. Good layout and clean cuts make the difference between a nice job and a great one.
More than decoration
A backsplash protects the wall behind sinks and cooktops from splashes and grease. It also ties together counters, cabinets and paint. It is a relatively small area, but because it sits at eye level, flaws are very visible. Crooked lines, uneven grout and messy cuts around outlets stand out.
That is why layout matters. We plan where the pattern starts, how tiles meet corners and windows and where cuts fall.
Tile types and looks
- Subway tile: classic and easy to clean.
- Mosaic and glass tile: more color and light.
- Large-format porcelain: fewer grout lines.
- Natural stone: warm but needs sealing.
- Peel-and-stick options: temporary or renter-friendly.
- Full-height slab behind the range for a clean look.
Layout and details
Good backsplash work shows in the details. We measure from the focal point, often the range, so patterns are centered. We align grout lines with outlets and trim, and cut tile neatly around switches. Where the tile meets the counter or cabinet, we use flexible caulk because those joints move. At open ends, we use trim or finished edges for a clean look.
How installation works
- Remove any old backsplash and prepare the wall surface.
- Mark layout lines and plan cuts.
- Spread adhesive and set tiles with consistent spacing.
- Cut around outlets, switches and corners.
- Allow the adhesive to set, then apply grout.
- Clean haze, caulk the joints and reinstall outlet covers.
Timing with counters
Backsplash goes in after counters are installed, so the tile can be sized and set against the finished top. If you are replacing counters, schedule the backsplash afterward. If you are only adding a backsplash, protect the counter during work. We also recommend moving small appliances out of the way.
Grout, caulk and keeping it clean
Grout color changes how a backsplash reads. Matching grout to the tile gives a seamless look, while contrasting grout highlights the pattern. Lighter grout shows stains near the stove, so some choose a mid-tone. Epoxy grout resists staining but is harder to work with.
Where the backsplash meets the counter, use flexible caulk. Rigid grout there will crack as the counter and wall move. Clean with mild cleaners and avoid harsh acids that can etch grout. A little regular care keeps a backsplash looking sharp.
Lighting and outlets
Under-cabinet lighting changes how a backsplash looks, bringing out texture and sheen. Plan lights and wiring before tile goes up so cables are hidden. Outlets and switches should sit in logical places and line up with tile edges where possible.
Where possible, we choose outlet covers that match the wall or tile. Small details such as these make the work look finished. If you plan to replace cover plates, buy them before installation so we can fit them as we go.
Questions to ask before you start
Ask how the tile will be laid out, where the first full tile will sit and how cuts around outlets will be handled. Ask what adhesive and grout will be used and how long before the kitchen can be used normally. A short conversation about these details helps you picture the finished wall and avoids disappointment.
Questions we hear on the phone
Short answers to what callers ask most. Call if yours is not here.
How high should a backsplash go?
Typical is to the underside of upper cabinets, or full height behind a range.
Can you install over existing drywall?
Yes, once the surface is clean, sound and smooth.
How long does it take?
A typical kitchen backsplash goes in over a day or two plus grout time.
Do I need to seal grout?
Cement grout benefits from sealing. Epoxy grout does not.
Related services
Tell us about your project.
Call and we will schedule your estimate.