Bathtub replacement in Burlington, NC
An old tub that is cracked, stained or hard to enter can be replaced with a new tub or with a shower that suits you better.
When replacement makes sense
Not every worn tub needs to go. A tired surface can sometimes be refinished. But when the tub is cracked, leaking, rusted through, poorly shaped or hard to get into, replacing it is the better answer. Replacement also gives you a chance to look at what is behind the tub, which is often a surprise.
Compare the options in our article on tub refinishing vs replacement. If the finish is the only problem, tub resurfacing may be all you need.
Types of tubs
- Alcove tubs that fit between three walls.
- Soaking tubs with deeper bowls.
- Freestanding tubs for larger bathrooms.
- Drop-in tubs set into a deck.
- Walk-in tubs with doors for easier entry.
What replacement involves
- Remove the surround and the old tub.
- Inspect the floor, framing and plumbing behind it.
- Repair damage and adjust drain and overflow positions.
- Set the new tub on a stable base and secure it.
- Install a surround or tile the walls with proper waterproofing.
- Connect fixtures, test and finish the trim.
A shower instead of a tub
Many households replace the tub with a shower. It is easier to step into, simpler to clean and often looks larger. If you want to keep a tub in the house, make sure another bathroom has one. Read about tub-to-shower conversion and the cost drivers.
Plan the whole alcove
The tub is only part of the alcove. The valve, showerhead, surround and floor edge all matter. We recommend choosing these together so the pieces match and are installed at the right heights. Call (336) 654-1130 to schedule a visit and a conversation about your options.
Choosing a replacement tub
Tubs vary in depth, length and shape. A deeper tub soaks better but is harder to step into. A longer tub may not fit the alcove. Material matters too: acrylic and fiberglass are lighter and warmer, steel is economical, and cast iron is heavy and holds heat. Check the weight, since upper-floor bathrooms may need floor reinforcement.
Also consider how the tub meets the walls. A tub with a finished apron looks neat in an alcove. Whatever you choose, we confirm measurements, drain location and overflow before it is ordered, because a tub that does not match the plumbing means extra work.
Getting the new tub into the house
Large tubs and cast iron models are heavy and awkward, and tight hallways and stairs can make delivery difficult. We plan the path from the door to the bathroom, protect floors and walls and sometimes use a smaller unit or a multi-piece design when the route is tight.
If the bathroom is on an upper floor, we also check that the floor can carry the weight of a tub filled with water and a bather. Where needed, we add framing support. This is part of why we look at the bathroom before quoting rather than guessing.
Questions we hear on the phone
Short answers to what callers ask most. Call if yours is not here.
Can the tub be replaced without removing tile?
Sometimes, but the tile edge often must be cut or repaired.
How long does replacement take?
Often several days, more if tile and repairs are involved.
Should I refinish or replace?
Refinish if the tub is sound. Replace if it is cracked, leaking or hard to use.
Can you install a walk-in tub?
We can discuss it. They have different plumbing and electrical needs.
Related services
Tell us about your project.
Call and we will schedule your estimate.