Open concept kitchen remodeling in Burlington, NC
Opening a kitchen to the rest of the house changes how a home lives. It also touches structure, so planning matters.
Why people open the kitchen
Older homes often have a closed kitchen, separate from the dining and living rooms. The cook is isolated, light stays in one room and serving a crowd means carrying food through a doorway. Opening the kitchen lets people talk, share light and use the space together.
It can also make a house feel larger without adding square footage. But the benefits depend on how it is done, since an open plan still needs places for noise, storage and clutter to hide.
What changes when a wall comes out
- Structure: some walls hold up the floor or roof above.
- Electrical: wires, outlets and switches inside the wall must be rerouted.
- Plumbing and ducts: pipes or heating runs may be inside.
- Flooring: floors on both sides may need to be patched or replaced.
- Ceiling: a beam may need to be installed and finished.
- Heating and cooling: airflow changes in a larger space.
Load-bearing walls
Whether a wall can be removed depends on what it supports. A non-bearing partition is straightforward. A load-bearing wall requires a properly sized beam and posts, temporary supports during work and often engineering and a permit. We check the framing and, when needed, bring in an engineer. We never guess about structure.
How the project runs
- Inspect the wall, attic and floor below to understand the structure.
- Decide on the opening size and beam type.
- Get required drawings and permits.
- Protect the house and set temporary supports.
- Remove the wall and install the beam and posts.
- Reroute utilities, patch ceilings and floors.
- Install new cabinets, counters and finishes.
Designing the open space
An open kitchen is on display, so the finishes matter more. Consider an island to define the cooking zone, a good range hood to control odors, and lighting that works for both cooking and entertaining. Flooring that runs through both areas creates a unified look. Plan storage carefully so the kitchen stays tidy.
More on this kind of work
Read about open floor plan remodeling, kitchen island installation and kitchen remodeling. For flooring across rooms, see flooring installation. Call (336) 654-1130 and we will look at the wall.
Noise, smells and the work triangle
Open kitchens share noise and smells with the rest of the house. A quiet dishwasher, a good range hood vented outside and soft-close hardware reduce disturbance. Place the sink and range so the cook can face the room, and make sure the hood is strong enough for the cooking you do.
The working triangle between sink, range and refrigerator still matters. Opening a wall can free space for a better layout, but it can also create a long run that is tiring to use. We sketch the kitchen with the new opening before work begins, so the room works as well as it looks.
Permits, engineering and schedule
Removing a bearing wall typically requires a permit and often engineering drawings for the beam. This takes time, so start early. Inspections occur at specific stages, such as after the beam is installed and after electrical rough-in.
Plan for the kitchen to be out of use during the work, and for the house to be dusty. We set up barriers, protect floors and keep the work area tidy. An honest schedule up front helps you plan around the disruption.
Questions we hear on the phone
Short answers to what callers ask most. Call if yours is not here.
Can any wall be removed?
No. Some hold up the structure. We check before planning.
Do I need a permit?
Structural changes usually require one. We explain the process.
Will the heating work in a bigger space?
Sometimes ducts need adjustment. We check this during planning.
How long is the kitchen unusable?
It depends on scope. We give a schedule at the estimate.
Related services
Tell us about your project.
Call and we will schedule your estimate.