Deck building in Burlington, NC

A new deck gives you a place to cook, eat and relax outdoors. Its structure decides how long it lasts and how safe it is.

Call (336) 654-1130Serving Burlington and nearby Alamance County townsEstimates scheduled by phone

Planning a new deck

Start with how you will use it. A grill and table need different space than a lounging area or a play zone. Think about the sun, the view, the path from the kitchen and the privacy you want. Then think about size, because a deck that is too small is more disappointing than one that is slightly large.

Decks are permitted structures in most places, and they need drawings that show footings, framing and connections. We help with the plan and the permit process.

What holds a deck up

  • Footings below frost depth and sized for the load.
  • Posts and beams sized to the span.
  • Joists spaced properly for the decking type.
  • A ledger board that is flashed and bolted to the house.
  • Hardware and fasteners rated for outdoor use.
  • Guardrails and stairs that meet code.

Materials

Pressure-treated lumber is economical and widely used. Cedar is naturally rot resistant and attractive. Composite decking resists splintering and needs less upkeep, though it costs more and can be hot in direct sun. Aluminum and vinyl railings avoid painting. Ask for the cost of upkeep over ten years, not just the cost at the start.

How the build proceeds

  1. Design the deck and get the permit.
  2. Lay out and dig footings.
  3. Pour footings and set posts.
  4. Install the ledger with flashing.
  5. Frame beams and joists.
  6. Install decking, railings and stairs.
  7. Inspect, finish and clean up.

The ledger and water

The most common decks to fail are those attached poorly to the house. The ledger must be fastened with the correct bolts and flashed so water does not get behind it and rot the house framing. This detail is invisible when done correctly and disastrous when it is not. We take the time to do it properly.

Beyond the basic deck

A deck can add a roof, a screened area or built-in seating. See deck remodeling for rebuilding an existing deck, decks and porches and deck vs screened porch vs sunroom. Call (336) 654-1130 to plan yours.

Stairs, railings and safety

Stairs and railings are where decks need the most careful building. Treads must be even, risers consistent and railings strong enough to resist a person leaning on them. Guards are required above a certain height, and baluster spacing is set by code to keep children safe.

We design stairs for comfortable use and for drainage, so water does not pool on treads. Lighting on stairs makes evening use safer. A deck is a structure that holds people, so we never cut corners on these details.

Maintenance for a new deck

A new deck needs care. Wood decks benefit from cleaning and a protective finish on a regular schedule. Composite decks need washing. Check fasteners, railings and stairs each year and look under the deck for signs of rot or insects.

Keep the area under the deck clear for airflow and keep plants away from posts. Early attention to small problems extends the deck's life significantly. We share a simple care plan when the job is done.

Questions to ask your deck builder

Ask about footing depth, ledger flashing, fastener type, railing design and who pulls the permit. Ask how long the deck will take and what finish or care it needs. A builder who answers clearly and in detail is more likely to build a deck that lasts and passes inspection without problems.

Questions we hear on the phone

Short answers to what callers ask most. Call if yours is not here.

Do I need a permit for a deck?

Usually yes. We explain the local process.

Wood or composite?

Wood is economical. Composite saves maintenance. We discuss both.

How long will a deck last?

It depends on materials, build and upkeep.

Can you build over an existing slab?

Sometimes, with the right framing. We check at the visit.

Tell us about your project.

Call and we will schedule your estimate.

Call (336) 654-1130
Call (336) 654-1130